[SOLVED] Unable to connect to QSI 690 from RPi3 - by: giorgio_ne
Success! I was able to take pictures at various exposure lengths:) The rig is now ready for a trial under a the stars. Thanks a lot for all your help with the qsi driver!! Giorgio
View ArticleServos in Indiduino - by: Gorgias
Hello, I needed to control servomotors from INDI (plugged on an Arduino connected to my Raspberry Pi), and I noticed that Indiduino does not support them, whereas Firmata already has those...
View ArticleASI120MM Hangs capturing 16bit - by: nmac
Hi! When capturing 16bit Mode (actually 12) my ASI120MM hangs forever and never downloads the image in long exposure. Anybody suffering from this issue? I have to disconnect the camera and reload...
View ArticleRegress to QHY driver 1.5 on the Pi for the SSAG? - by: garthb
Hello, I'm exploring whether I can use INDI server on my Pi and for the most part, everything seems great! The part that doesn't work as well is my SSAG. Judging from other research I've done on the...
View ArticleCanon DSLR Mirror Lock - by: mathieu
Hi all, total noob here. I installed Ekos yesterday and I'm sure I'll love it once I become familiar enough to appreciate it. I've somehow managed to shoot a couple of test frames with my Canon 550D...
View ArticleINDI libqsiapi coexists with native libqsiapi? - by: anat
Hello I am using a QSI683 camera and want to use both GoQat and INDI for controlling the camera. For GoQat: I install the binary libftd2xx from FTDI and compile libqsiapi using ./configure...
View Articlei-Nova PLb-Cx on Raspberry Pi - by: nikoberlin
Hello erverybody, has someone got the i-nova CCD to work on raspberry pi (raspbian jessie) with the latest driver version 2.2.6 from i-nova. My setup seems to be fine. When i star indiserver with -vv...
View ArticleCanon DSLR Connected to Raspberry Pi Not Connect - by: Psamathe
Sorry if this is really dumb but I'm something of a novice and am unsure how to diagnose/resolve hence seeking advice. Setup: Raspberry Pi3 loaded with IndiLib (not Kstars/Ekos). Two devices connected...
View ArticleTemperHum - by: Vox45
Hi all, Is there a way to read the temperature and humidity recording created by temperhum and have it displayed in Ekos, a bit like BYEOS or APT does ? I see in the "weather station" section that...
View ArticleDid something really stupid now cant start indi - by: dokeeffe
OK so I just did something really stupid and I'm looking for help. I opened my roof, unparked the scope and slew to a target. It was still twilight so I thought While waiting I'll do apt-get...
View ArticleClik here to view.
Ekos & Moravian - by: ggkids
Hello, I was trying my Moravian G2-8300 in my laptop installation of Indi just updated. If I set a profile using MI ccd usb as CCD an error occurs as shown in the attached screenshot. If I start...
View ArticleEQMod Tracking problems - by: nikiosna
Hi I have some problems with my diy astroeq controller and an eq5 mount. Under windows in the Ascom software everything works fine, but i wan't the astrometry feature from indi. The problem is that...
View ArticleNikon D5500 with Ekos VM? - by: Gasman
Hi Guys Thinking of installing Virtual Box and Ekos VM on my windows 10 64 bit laptop and wondering if my new Nikon D5500 dslr will work with Indi?. Anyone tried this dslr please? thanks Steve
View Article[SOLVED] Guiding issue - by: Jean-Phi
Hi! I am facing a strange issue with the guiding: When I click on "Capture" on the guiding tab, the pictures are taken continuously... With 1 second exposure, one picture is taken every second without...
View ArticleEkos Guiding failure - by: Kaczorek
Ekos Guiding is not possible after latest changes to Kstars - capturing an image at Calibration tab results in infinite loop of image capture procedure. Moreover each image is displayed in the separate...
View ArticleMany problems with asi drivers - by: patdut
First the communication between indi remote asi driver and local indi server fail with the latest updates. Maybe I wasn't at same release level on the remote and the local laptop. The symptoms were...
View ArticleQHY_CCD not working in VM - by: ernsts
I am using an QHY5-ii camera and I upgraded all INDI-software to the newest versions this weekend. The camera works in the native environment (KUBUNTU 16.04), but not in the latest EKOS VM, even if the...
View Article[SOLVED] cant start indi - by: dokeeffe
OK so I just did something really stupid and I'm looking for help. I opened my roof, unparked the scope and slew to a target. It was still twilight so I thought While waiting I'll do apt-get...
View ArticleINDI Testing Framework - by: ajk
Hi there, I'm new around here. I just forked on Github to add a new USB based Focuser (HitecAstro DC Focuser) and will PR on Github once I have finished and tested it. But, regarding this thread, I...
View Article[SOLVED] CCD Simulator Not Connecting - by: sfrank
Hi all! I'm trying to simulate taking an exposure with the Raspberry Pi. I've tried the following sequence with no luck: Open the first terminal: Open a second terminal: When I send this command, the...
View Article