Problem connecting to QHY-8 ccd - by: grantboxer
I am attempting to connect to my QHY-8 camera but when I go via the KStars Device Manager and try to start device, I get a message saying indi-qhy-ccd:Open QHYCCD error. When I try to connect via the...
View Article[SOLVED] Problem installing Ekos - by: grantboxer
I have deleted the ekos vm and re-installed. It now works OK. Don't know what I did before! Cheers Grant
View Articlespecific question about set get eval - by: emalabro
Here's the problem I've to move the mount (skywatcher az-eq6) to a couple of angles. I saw in other topics that other users manager to move the mount. In a page of the developer manual, there's a...
View ArticleStacking 2 Raspberry Pis via Eth port - by: noste99
Dear Forum, Somewhere here I saw even pictures showing two RPis interconnected directly via their Eth ports, but I cannot find the author back. I have done that as well and it works fine. My only...
View ArticleUpdated QHY SDK - by: knro
Starting tomorrow you'll get an updated QHY driver. It is built on a newer QHY SDK. Please test and report here. You can enable verbose logging, but it will not be logged to the regular INDI log file....
View Articleproblem with launch indiserver with simulator - by: Christian
hi, I've just to update indilib and i can't launch simulator (telescope, ccd and others). I've the messages below : The directory log is already created. The problem is only for the simulators, the...
View ArticleUnable to connect to QSI 690 from RPi3 - by: giorgio_ne
Hi Guys, I'm unable to connect my QSI 690 to INDI server running on a Raspberry Pi3 and a freshly installed copy of Ubuntu Mate 16-04. Here is the output of lsusb: Bus 001 Device 006: ID 0403:eb49...
View ArticleZWO 120MM Error (11) - by: Christian
hi, i just bought my new camera zwo asi 120MM. I plugged, she's recognized. But when i want in indi control panel use the streaming i've the error below : 2016-05-20T18:57:32: Error reading video data...
View ArticleRigelsys NStep focuser driver - by: polakovic
Hi, is there anybody who can test Rigelsys NStep focuser driver? Thank you, Peter
View ArticleClik here to view.
Astrometry.net performance results for Odroid C2 - by: NickK
I'm using a random (near the beehive) image from a 383L (5.45um pixels, 3362x2537 pixels 16bit = 17MB) to act as a performance test. The Pentax is a 4" refractor at 670mm native focal length giving a...
View ArticleIssues with lodestar X2 CCD - by: Dave
I've been having some issues with my Lodestar x2 CCD, when I open ekos in kstars I can connect to the mount and DSLR just fine but the CCD just hangs on an amber light. I can persuade it to connect by...
View ArticleSupport for BloomSky weather station - by: jrsphoto
I have a Bloomsky Weather station and I was wondering if support could be added to Indilib/Ekos for it. They are GIVING them away to those who would fill out a form here: community.bloomsky.com. Its...
View ArticleINDI GPhoto NG - New testing driver - by: GuLinux
Hi everyone, I had been rewriting the old gphoto ccd driver, and I think it's currently ready for public testing. You can find the driver and instructions for compilation here:...
View ArticleClik here to view.
INDI Server for Windows - by: polakovic
wINDI became INDI Server for Windows (similarly to INDI Server for OSX). Not just because of marketing reasons, but also because of windi virus and a stupid antivirus protection on some operating...
View ArticleCelestron slew rate selection with Joystick - by: Gorgias
Hello, I am controlling my Celestron Nextar 8SE mount with a joystick. I know that in the Telescope simulator for example, it is possible to set the slew rate, to park/unpark the mount or abort the...
View ArticlePatch: Change slewpreset with gamepad buttons - by: pch
Hi, I am using indi_eqmod on a Rpi2 to control my HEQ5 and I occasionally connect a gamepad to move the telescope. I find it very difficult to change the slewpreset with a joystick, despite a careful...
View ArticlePi 3 no does not start Indi - by: ggkids
Hello, i installed kstars-bleedind and Ekos in a Raspberry Pi 3 by official repository. When I try to start indi in Simulators profile does not happen anything at all: "Connect" button never gets...
View ArticleMissing 3rd party drivers in Ekos VM? - by: Gorgias
Hello, I have the Ekos VM 1.5.0 (Kubuntu 16.04). I know that a newer version 1.5.1 is available, but it takes time to install the astrometry.net data and other stuff I have installed, so I prefer to...
View ArticleCan't find indi-full in repository - by: Vox45
Hello all! I decided to move away from windows so I have downloaded Mint Linux and followed the instruction to add Ubuntu repository All want well but this line: sudo apt-get install indi-full I get...
View Article[SOLVED] Celestron slew rate with Joystick - by: Gorgias
Hello, I am controlling my Celestron Nextar 8SE mount with a joystick. I know that in the Telescope simulator for example, it is possible to set the slew rate, to park/unpark the mount or abort the...
View Article