Astroberry Server - by: Kaczorek
I have just finished building a sneak preview of Astroberry Server and prepared a video teaser for it - Astroberry Server is a preconfigured desktop for Raspberry Pi 3 with KStars, Ekos and INDI server...
View ArticleOptec Pyxis Camera Field Rotator Support - by: Krueckel
I own an Optec Pyxis Camera Field Rotator, Are there plans to support this in indi? Enclosed is the technical manual (4.3 communications Protocol)...
View ArticleHNSKY planetarium program, INDI interface fixes - by: han.k
This planetarium program has an INDI interface since 2016. Some problems in the INDI interface are now fixed in version 3.3.3a_FPC: 1) Remote control sessions are now better supported. 2) Fixed a...
View ArticleClik here to view.
TIS DMK21AF04 (firewire camera) - functional in INDI? - by: MiHell
Has anyone a working installation of a firewire camera? Specifically using the above mentioned DMK21AF04? The camera is functional (Kubuntu 16.10, kstars-bleeding, last update) using the Coriander...
View ArticleMultiple V4L2 CCDs - by: TallFurryMan
Hello, As far as I understand, drivers save and load configuration from XML files named after their own driver names. Is there a way to have two drivers load two different configuration files? As an...
View ArticleAutomated ADU - Actual exp time in file name not being recorded - by: kcobby
When using the automated ADU feature for sequenced Flat frames, which works great by the way, the captured frames do not display the actual exposure time of the Flat frame. Filter name and time stamp...
View ArticleSequence Progress - by: kcobby
Would be great to have a time based count down total of the active running sequence. 02:30:00 of 05:00:00 completed (50%)
View ArticlePHD2 guider setting and connecting to INDISERVER - by: maudy
Creating a specific thread on this, to not hijack others... To install the last kstars so PHD2 works, should I be building from source instead of installing from PPAs? I just rebuilt the RPI3 from...
View ArticleFocusing module in Ekos with GPhoto+Canon DSLR - by: kecsap
Has anybody used the Focus module in Ekos for Canon DSLR and GPhoto? I have a Canon 1000D camera with Canon EF-S 55-250mm f4-5.6 IS STM lens. When the lens focus is set to "infinity" in manual focus...
View ArticleFITSViewer opened for frames captured by PHD2 - by: tliff
Hi there, I have ekos connected to my indiserver, also PHD2 to do the guiding. Both my guide cam and the main ccd are ZWO cams. (Side note: if you do not set PHD2 in your indi profile but the driver...
View ArticleKstars OS X missing drivers - by: ColoradoSolar
I downloaded KStars today and watched some videos on it. I think I am going to like Ekos if I can ever get it setup correctly. I have an ASI1600MM-C and if I go into the device manager I can see the...
View ArticleASI Camera - Gain/Offset/x-Bit - by: kcobby
After getting to better understand my ASI1600MM-Cooled it seems it would be desirable to select a Gain/Offset/Bit -Rate from within the Ekos Control panel (like the ISO selection feature) rather than...
View ArticleZWO ASI 1600MM-COOL gain settings? - by: myxlflik
I recently purchased a ZWO ASI1600MM-COOL camera and have just now started trying to set it up with IND/Ekos. While the camera seems to connect and image just fine, I can't find any setting for...
View ArticleHow to make gphoto save images only to SD card? - by: koichi
I'm running the INDI server on a RPi3 which is controlled remotely from the kstars on my MacBook Air. A Nikon DSLR is connected via USB to the RPi and I can capture and auto-focus with the USB_focus on...
View ArticleKstars Say Sun is up in the middle of the night - by: ColoradoSolar
It is currently 12:22AM local time and when I start kstars it shows the Sun being up in the sky. It says the Rise Time is 3:57PM and Set Time is 5:57PM. What setting do I have wrong that can cause this?
View ArticleEkos on a large monitor - by: ColoradoSolar
It would be nice if sections of the Ekos windows were resizable because when I run Ekos on my big monitor the log view takes up about 50% of the height of the window. I would much rather see more of...
View ArticleHow to make and submit a patch? - by: ColoradoSolar
I have made a small change that puts a splitter in between the log view and the rest of the screen and now I would like to submit a patch for possible approval but I'm not sure how. I have used git a...
View ArticleASI1600MC-C question - by: xsnrg
Greetings, I have a ASI1600MC-C that I am trying to use with the latest INDI-bleeding packages on Fedora. I also have a ASI290MC. I am able to capture a preview image in RAW 8bit, RGB24, and LUMA, but...
View ArticleSaving Observer and stream location - by: maudy
Hi, Would it be possible to save the FIT Header Observer setting on the CCD drivers; at least it does not for indi-asi-ccd? It reverts to unknown. Also would it be possible to save the streaming save...
View ArticleIssue installing INDI on Raspbian - by: phomer60
I am attempting to install INDI on Raspbian and falling at the first hurdle, can anyone assist? sudo apt-get install libnova-dev libcfitsio-dev libusb-1.0-0-dev zlib1g-dev libgsl-dev build-essential...
View Article