sbig driver only connects under root account - by: hajo
Hi all, I try to connect to my SBIG ST-i with sbig indi driver. This works when I am logged in as root. When I try this from my user account I get 2017-02-25T18:34:37: Failed to connect CCD at port USB...
View ArticleDome Sync Gateway not producing timely GOTO commands - by: Riprock99
Hi all, I am using Cloudmakers software, including INDI Server (IS), INDI Control Panel (ICP), and AstroTelescope (AT) with my CGEM DX and home motorized 8' dome. I have been using the Dome Sync...
View ArticleSBIG 8300M debuging - by: CapnRon
I have an SBIG 8300M USB with TEC cooled CCD. It works fine under the CCDOps program from the PC. I am now running an Rpi INDI web server; the web server shows the Indi_sbig_ccd camera driver as...
View ArticleDisplay at the scope - by: CapnRon
I am using an Rpi INDI server at the scope instead of a pc. My remote PC is well remote (in the house), The purpose of doing this was to eliminate the PC at the scope and having to run USB cables to a...
View ArticleSeeking tips for imaging with schedule and sequences for EFW - by: maudy
Hi, The weather has not been great so it has provided some learnings, and challenges: ice melts so thing do not remain level, lol. The clouds actual made one session complete without a specific filters...
View ArticleFitsheader format.. - by: maxer
Hi Jasem, I just noticed that SAOimage doesn't understand the decimal format of RA/DEC so I wish there could be a choice of getting the sexadecimal or decimal (oldstyle / newstyle) format of the...
View ArticleClik here to view.
EQMod : Persistant guiding rate - by: boulabytes
Hi, I recently built an observatory in my backyard. I decided to switch my software from windows to Gnu-Linux/Kstars/Ekos/indi . Everything seems to work fine, but with eqmod I need to set my desired...
View ArticleMay I introduce - my Raspberry Pi Controller/Autoguider - TSC - by: wbirk
Hi! recently I trashed my Littlefoot V-power, an action that left my without a stepper controller for my rather heavy Houghton telescope. Beyond that, I was annoyed by the plethora of adapters, cables,...
View ArticleInstall of "indi-full" and "indi-full kstars-bleeding" fails. - by: timsdeepsky
Hi, Thanks for a great project.... I have 2 Meade DSI's, and a Meade LX-90 scope i am trying to migrate to your INDI software, from my old Meade software.... I have an HP Envy laptop with the following...
View ArticleClik here to view.
KStars not starting up after indi update! - by: lubel
Huge problem here! I cannot start-up KStars and / or PHD2 anymore after an update of the indidrivers today! "kstars: error while loading shared libraries: libindi.so.1: cannot open shared object file:...
View ArticleClik here to view.
Can't change ISO of indi_v4l2_ccd device in EKOS - by: sasax
Hi, first of all a great thanks for making life much easier with indilib and EKOS! It's amazing how quickly one can set up telescope automation with it. I connected an old Meade ETX90 w/ Autostar to a...
View ArticleINDI Library 1.4 - by: crose01
I'm trying to update my Raspberry Pi to the new drivers but when I enter sudo apt-add-repository ppa:mutlaqja/ppa I am getting the error aptsources.distro.NoDistroTemplateException: Error: could not...
View ArticleXML/Endpoint Documentation - by: jwellman
Hello, I would like to write a client against INDI but I'm not having much luck finding any documentation (other than C source that is using the indi library). Is there any documentation about the...
View ArticleAtik drivers crash - by: Kaczorek
I have just upgraded to indi v1.4.0 and I get instant crash when connecting atik filter wheel driver. Peter, is it possible that the latest atik drivers (1.17) need recompilation against the new indi...
View ArticleNo meridian flip with Losmandy mount - by: mlarsson
Hi! I just ran into the interesting situation where the mount shoud do a meridian flip, Ekos reports that a flip is initiatied and then completed, but the mount does not move. No flip accomplished,...
View ArticleNo meridian flip with Losmandy mount - by: mlarsson
Hi! I just ran into the interesting situation where the mount shoud do a meridian flip, Ekos reports that a flip is initiatied and then completed, but the mount does not move. No flip accomplished,...
View ArticleMount meridian flip - by: knro
Folks, in the Ekos "meridian-flip" code, I check if there is a difference in RA after issuing the meridian flip to see if the mount is actually flipping. If there is no big RA difference (I arbitrary...
View ArticleDEV question: Compiling custom drivers against INDI 1.4 - by: dokeeffe
Sorry a CMake Noob question..... Wondering if someone could help me please? I'm trying to compile my custom driver which did compile fine about a month ago. Now I get this error 'Could NOT find INDI...
View ArticleDithering is not executed with external lin_guider - by: noriQ
Hello. I am running the INDI server with Raspbian on Raspberry Pi 3. It is very nice and fully working. I have one problem. I am using an external lin_guider, but dithering is not done. When I execute...
View ArticleFITS viewer statistics window fields too narrow to display data - by: phomer60
I am using the latest release and find that some of the statistics fields are unusable due to being unable to see the significant data. For instance the Max, Std Dev and Median values exceed the...
View Article