Clik here to view.
AtPark Sensor - by: Gonzothegreat
For anyone building a compact observatory where it's critical that the mount is parked before closing the roof, I think the following might help you: AtPark Sensor I'm going to get one for my system as...
View Articlefeedback for the new feature: "Scope park aware" - by: Gonzothegreat
Opening a new thread (follow up from EqMod: unpark only if dome is). Thanks to dokeeffe for implementing the new function "Scope park aware", much appreciated. I have some feedback (running the latest...
View ArticleAnother Plate Solving Question - by: jonel
I am slowly learning how to use this marvelous software. I've managed to figure out how to correctly use most of the modules but the Alignment module is still giving me problems. I am using a Meade...
View ArticleAtik 1.6 Driver problem - by: sywong2000
Hi I'm running a Pi3 with ubuntu 16.04 and I've installed the Atik 1.6 driver from cloudmakers. Ekos was able to take an image but the FITS preview never pops up. I've tried to run the atik ccd test...
View ArticleClik here to view.
indi_getprop issue. Some prop are displayed twice - by: Besson
I'm close to be ready to provide a new driver for the Optec IFW filter wheel, and have to finish the manual for it. When I've used the indi_getprop to list all available properties within this drivers...
View ArticleUSB Focus dispatch error - by: Adam
Hi, I am trying to set up a USB Focus v3 kit on a Raspberry Pi 2. Latest INDI with usbfocus 0.7 driver on the Pi and latest KStars from the PPA. When I connect to it from Ekos, all values are reported...
View ArticleIndi driver for DIY stepper-driven focuser - by: fm
Hi, I have built a diy stepper-motor driven focuser ; it is controlled through a python script running on a raspberry (script attached). Basically, it uses 4 arrow keys (up/down to set speed,...
View ArticleNew Python + INDI (PyINDI) tutorial is up - by: knro
Jean-Luc wrote an excellent new tutorial for using PyINDI on devices like Raspberry PI (but it's applicable to all systems). Check it out if you want to use Python + INDI in your project!
View ArticleEkos and Canon 6D setup - by: Astrofriend
Now I have come to the point where Ekos is running and I can connect to my EQMod mount, it seems to work perfect. My Canon 6D camera is more difficult to get to work. I can do exposures, but the...
View ArticleHelp with Mac Network Problem Revealed by Cloudmaker software - by: Riprock99
Hello, I have been using INDI through the Cloudmaker software, and the extensive help of Peter Polakovic. We have run into an issue that is tripping us up across all of his software. Specifically,...
View ArticleClik here to view.
ATIK Titan + INDI + Kstars + Odroid C2 'wisdom' - by: NickK
I've worked with the Titan and other ATIK cameras quite a bit - in the past I've written drivers for it. I know a few people have had issues with the Titan and iNDI on the Odroid.. so here's the...
View ArticleClik here to view.
ASI-1600MM-Cool image download lockups - by: H__
My ASI-1600MM-Cool camera regularly locks up while downloading an image. The INDI control panel then shows a yellow expose light and ever changing remaining download times. syslog shows no camera...
View ArticleAtik 314L Connection Problem - Yellow Light - by: Graham
Hi, just joined the forum. Installed INDI this weekend via VirtualBox. Got my QHY5II guider and Xagyl filter wheel working fine, but my Atik 314L gives a Yellow light in the Control Panel when I try to...
View ArticleIndi and Raspberry pi 3 - by: Jasonmur
Hello all. Could anyone tell me if I need internet connection to use Ekos and Indi library? I only have internet access through my smart phone plan. I managed to ssh from my laptop, running Ekos...
View ArticleOdroid C1 - Ubuntu 16.04 LTS support - by: Gonzothegreat
If you own an Odroid C1 and was thinking of moving to a C2, I've just noticed now that Ubuntu 16.04 LTS is now supported on a C1. forum.odroid.com/viewtopic.php?f=112&t=22789 thought I would share...
View ArticleUSB Focus dispatch error - by: Adam
Hi, I am trying to set up a USB Focus v3 kit on a Raspberry Pi 2. Latest INDI with usbfocus 0.7 driver on the Pi and latest KStars from the PPA. When I connect to it from Ekos, all values are reported...
View ArticleIndi driver for DIY stepper-driven focuser - by: fm
Hi, I have built a diy stepper-motor driven focuser ; it is controlled through a python script running on a raspberry (script attached). Basically, it uses 4 arrow keys (up/down to set speed,...
View ArticleIndi and Raspberry pi 3 - by: Jasonmur
Hello all. Could anyone tell me if I need internet connection to use Ekos and Indi library? I only have internet access through my smart phone plan. I managed to ssh from my laptop, running Ekos...
View ArticleMoonlite focuser clone problem - by: jonel
I built the basic moonlite focuser clone following the information and arduino sketch presented earlier by PATDUT, ( TOPIC: Moonlite focuser protocol) using the stepper, and driver board he used along...
View Articlephoto - by: michele
Hello. I have two questions. I connected Synscan and the Nikon D5550. The mount works perfectly, but when I plug in my Nikon, I get the error (-53) that can not connect to the USB and asks me if Power...
View Article