Clik here to view.
satellite or plane... - by: Gonzothegreat
there is always one screwing up a shot !!!!!!
View Article[SOLVED] Using the plate solver from the command line on OS X? - by: jerry
This has been addressed when KStars on OS X was being developed, but I haven't found a solution that works for me now. I have issued the following export before running the command This attempt to...
View ArticleClik here to view.
Very happy with first Ekos image! - by: airscott
First image with INDI/KStars/Ekos! IC1396 (Elephant's Head Neb + Herschel's Garnet Star) from my urban backyard last night under 1st Quarter moon. Controlled in ubuntu mate with a 2-ounce Intel Compute...
View ArticleEkos plate solver woes - by: airscott
Having a lot of trouble with the plate solver, both online and offline. Trying "Capture and Solve" in Alignment module using a 200 mm scope with a full-frame color CCD. FOV is 400'x600' and I have all...
View ArticleNo exposure for 3 hrs - help understanding logfile - by: mlarsson
Hi! Recently, I've had a load of problems - from software problems to guiding being awful. Last night, everything seemd to work (almost) well. So I set up the scheduler to capture throughout the nigt -...
View ArticleClik here to view.
Cigar galaxy - by: Gonzothegreat
This picture is never going to win any awards, ever... but for me it's a win. I used Siril to stack them (no idea if I've done it correctly), 10x 150seconds exposure at 0degree cooler with the Atik...
View ArticleProblem getting started with KStars for Windows - by: the.cakemaker
Hey there. Recently i created a Facebook Group in German Language for KStars/EKOS/INDI. There were a few interested people there quite fast. One of them contacted me with a Problem right at the start....
View ArticleScheduler problems - by: tkottary
Hello, Please advise on the below. use case : I had a pending job to be completed from previous night, so I loaded 4 out of 16 jobs including pending one and hit run. Now the scheduler prioritized...
View ArticleAutomatic Meridian Flip. How does that work - by: the.cakemaker
Hi again! I am testing around atm, that works OK. But today the thing was that i expected the mount to automatically do a flip when pac-man nebula crossed the meridian. But nothing happened. I am not...
View ArticleGuiding suspended - by: fmozza
Under what conditions would guiding be suspended? I'm using PHD: I have never set any parameters to having guiding suspended in PHD2, EKOS or INDI panels, yet, tonight when I initiated an image...
View Articlestellarmate and verizon mifi - by: suvowner
how do i get the real vnc viewer to connect to the stellarmate through a verizon mifi hotspot device. I cant seem to figure out the right ip address for the stellarmate, and not sure if I need to...
View ArticleClik here to view.
Very happy with first Ekos image! - by: airscott
First image with INDI/KStars/Ekos! IC1396 (Elephant's Trunk Neb + Herschel's Garnet Star) from my urban backyard last night under 1st Quarter moon. Controlled in ubuntu mate with a 2-ounce Intel...
View ArticleClik here to view.
Cigar galaxy - by: Gonzothegreat
This picture is never going to win any awards, ever... but for me it's a win. I used Siril to stack them (no idea if I've done it correctly), 10x 150seconds exposure at 0degree cooler with the Atik...
View ArticleHow do you work with fits files under linux - by: wotalota
In between the clouds and full moon I'm collecting images to use them to learn about stacking and processing. The default for opening .fits files on my system is gimp but by default it shows just one...
View ArticleThanks Jasem for the Gallery sub-forum - by: Gonzothegreat
Much appreciated, I think it's good to have a gallery showing off what can be achieved with Ekos/Indi.
View Articlehaving trouble moving the telescope as a client - by: xuchang970621
Hi everyone, so, we are trying to use INDI protocol to write a client, and connect to indiserver to control a telescope. But before everything, we are testing the commands through telnet to control a...
View ArticleAtikccd 1.29 - by: tseckler
I am wondering why the directory structure was changed for atikccd. Even after copying files to the proper directories I have been unable to successfully get atikccd 1.29 to work on a Raspberry Pi B...
View ArticleIC1396 (Elephant's Trunk nebula) - DSLR - by: nmac
First I would like to thank Jasem for this Gallery! Second, here is one of my recent images captured using Ekos: IC1396 (Elephant's Trunk nebula) - 105x600s (17.5h) ISO800 - ES80480 Triplet - Canon...
View Article[SOLVED] Ekos plate solver woes - by: airscott
Having a lot of trouble with the plate solver, both online and offline. Trying "Capture and Solve" in Alignment module using a 200 mm scope with a full-frame color CCD. FOV is 400'x600' and I have all...
View ArticleM 33 from my SQM 20.2 backyard - by: wvreeven
I used a modded Canon EOS 700D and a WilliamOptics ZS71 ED on a HEQ5 with belt mod to take this pic of M 33. I wanted to take 60 images of 3 minutes each but due to DSLR connection problems (not a...
View Article