Driver for older Orion Starshoot Deep Space Imager - by: jonkjon
I have an older Orion Deep Space Color Imager II lying around. I know the chip is the same as is in the Meade DSI II cameras. Does anyone know of any Linux drivers that might work with this beast? It...
View ArticleAuto focus with GPhoto CCD - by: jonkjon
I was just wondering if when using the GPhoto CCD remotely, should I change the image settings to a lower resolution temporarily? I have had the autofocus not quite reach focus a time or two (although...
View ArticleNew AZ-EQ5 - by: Entilza
Hello after reading about the indi project I was excited to give it a try, I am getting the following error with my AZ-EQ5. This is a new mount and even with EQMOD it needs custom advance settings for...
View ArticleEQMod alignment with Ekos Align module - by: knro
So today I encountered an issue with INDI EQMod driver while using Ekos Align module. EQMod was set to "Nearest Point" Alignment Mode and Ekos Align module initially worked after a few iterations to go...
View ArticleEnlarge the rang of aperture - by: max
Hi, I try to use a small len 100mm/f3.5 to guide my cannon 200mm/f2.8 Len , this would be a very small setup. But ekso keep saying it only accept aperture value start from 50, but my is 100/3.5=28.57,...
View ArticleATIK CCD short exposure - by: lemoult
Hello I and some other friends, we currently add a camera indiclient for the "audela" software. I have trouble with ATIK CCD. I failed to obtain exposure short than 3 seconds. The camera return a busy...
View ArticleMosaic.. - by: maxer
Hi all! I have quite small FOV with my new 200mm and even smaller with my old 300mm and sometimes I'd like to image a greater area without a lot of hassle calculating coordinates, so some kind of...
View ArticleEKOS sequences instantly going to status complete - by: dokeeffe
I'm probably doing something wrong here so apologies in advance. The first sequence run went good, the second one just instantly changed to 'complete' when I started the sequence. Here is what I did In...
View ArticleRPi Ekos Panel buttons have no icons? - by: lazjen
Some of the buttons in the Ekos panels have no icons, e.g. the Sequence queue buttons in the CCD & Filter Wheel panel. Another example is in the Object & Sequence Selection panel - most of the...
View Article[SOLVED] Antiblooming (QSI 583) with INDI - by: minaya
Dear all, Is there any way to control the antiblooming from INDI with the indi-qsi driver? I'm trying to remote control an QSI 583ws with it, and it works nicely except for the fact that I've some...
View ArticleSun < alt_value constraint in Ekos - by: minaya
Dear all, I'm pretty amazed by how nice the sequence tab looks like in the current Ekos. I just have a minor idea: to include a Sun < altitude value constraint (and/or something equivalent, like...
View ArticleClik here to view.
[SOLVED] Compiling GuideStarCatalogue Odroid c1+ (arm)? - by: Magnus_e
So in my quest in building an observatory i just ordered the shoestring focus controller and a focus motor, along with some dew heaters. When i get my package i would want to do some testing in daytime...
View ArticleClik here to view.
Astrometry for OS X - by: polakovic
Hi, having a lot of troubles with Homebrew astrometry.net package we decided to make native port and wrap it together with a web service server into simple to use GUI, the same way, as we did with INDI...
View ArticleSbig STi issues - by: lazjen
I've got the Sbig Sti colour and I'm having some problems. I think some of these are known, but I'll raise them here. 1. Trying to capture an image never succeeds - it gets to "Prinary CCD readout in...
View ArticleClik here to view.
INDI USBRelay2 Roof on GitHub - by: Magnus_e
Hi. A while ago i started on a new custom roof / power device indi driver. I have made it out of pending personal needs, but "i think" it's so useful that i uploaded it to github in hope that someone...
View ArticleProblems with the Ekos guide module - by: mlarsson
Hi! I'm having Ekos up and running nicely, remotely connecting from my sofa to a laptop beside my telescope outdoors. However, I have some troubles with the guide module. My experiences are limited,...
View ArticleRecommendations for Speckle CCD Driver? - by: adinghi
Hi team, I have a need for a CCD driver which can capture a bunch of short exposures quickly -- about 1000 exposures of 10-60ms each. All of them should be put into a single rather large FITS file...
View ArticleMaxDome issues - by: lazjen
I'm running INDI on a Raspberry PI 2. I'm having a number of issues with the MaxDome driver operation. Occasionally the dome will just start rotating even though no other movement seems to have been...
View ArticleZWO ASI 120MC not working with RPI2 - by: noste99
Hi, After two weeks, now and than trying to have my brand new ZWO running, I become hopeless. This camera according the different fora should be an excellent investment but under linux I do not get it...
View ArticleWatchdog choice to park dome fiirst or mount first - by: Magnus_e
Hi. I have been testing watchdog and i really like it. Only issue is that i need to be able to park my mount before my dome. i made an update where the user can choose. Have tested all the different...
View Article