Lodestar X2 crashes - by: PK
The INDI driver for my SX Lodestar X2 keeps crashing when I first launch INDI on my Zotax Pi133x. But when I go into the INDI control screen for the Lodestar and click “Connect” a couple of times, it...
View ArticleGuiding Issue - Guide Camera Stops Responding - by: pluciano
Looking for some help! I'm just getting setup with Stellarmate - so far I have everything up and running, just having issue with guiding... My setup: Stellarmate running as Indi server, connected to...
View ArticleGetting Ekos to work with ioptron Electronic Focuser? - by: Pessemist
Hello- A real newbie here. I have an iEQ45 Pro mount using a iOptron Electronic Focuser on a 8" RC scope. I recently acquired a StellarMate and after going over all the documentation I managed to get...
View ArticleQHY10 on Raspberry - by: amann
Problem cooler QHY10 on Raspberry (Test with Raspbian-stretch and Ubuntu-mate) - Define temperature working on screen with message Cooler on. - After power on DC201: Temperature don't decrease on...
View ArticleIssue with Celestron Nexstar driver - by: rmor51
I use for Celestron AVX the Celestron Nexstar driver. SInce an update, when Ekos starts, the mount into KStar is not located ont he polar star. It is far from under the horizon or near the Sun. I have...
View ArticleScheduler still capturing after job completion - by: fenriques
I have some issues with the scheduler job completion on INDI v1.7.4, Kstars v2.9.8. Whenever I start a new job, after capturing the scheduler doesn't trigger the shutdown procedure but reschedules the...
View ArticleMonolithe driver does not store stepsize - by: RogueSquadron
The setting of half step / full step is not stored properly. Even if set to half step and saved the driver is set to full step again when restarting. This might not look like a big issue but it...
View ArticleeKOS DSLR problem after switching cameras - by: rkarpa01
Hello, before I ask my question, a quick introduction of myself... I am based in the northern part of Germany and started with Astrophotography about 2 months ago and since I do not use any Windows...
View ArticleOptions windows don't open - by: Herrhausen
Hi! I haven't used KStars for a couple days and when I started it today (Build: 2018-09-16T16:51:34Z) I found pressing the Options button under Ekos "Setup" won't open a window as it would normally be...
View ArticleManual Darks, Bias and Flats - by: rkarpa01
Hello, I am using a DSLR on a scope that does not have a a flip-flat device and I manually have to put the cap on the scope (or the light-source in case of flats). When I tested this with an earlier...
View ArticleThanks for INDI/Ekos/Kstars - by: crw4096
Hi all, I just wanted to say thanks for the great software. It has taken me quite a while to get all my equipment working with it, but it is starting to live up to its promise. My biggest problems were...
View ArticleQuestions about camera sequencer - by: crw4096
Hi, I'm a bit confused about the intended purpose of the sequencer. Obviously, it's great to be able to set up a series of image captures with all the right parameters, and I use this. What confuses me...
View ArticleAtik One: filter wheel lost - by: hen
Hello, in order to run my new Atik one plus + guider GP I installed the atik-drivers (atikccd-1.29-amd64.deb) on my notebook (ubuntu 18.04.). I can connect to both ccd, but there is only one slot of...
View ArticleKStars 2.9.8 stopped counting exposure progress - by: PK
I upgraded KStars to 2.9.8 and noted that my progress counter remains at zero even though the actual images are being captured and saved. Right now I have 9 of 20 images saved yet the progress still...
View ArticleNightly build - by: alacant
Hi everyone I have the nightly ppa registered on my Ubuntu 18.04 box but apt update doesn't report anything new any longer. Is it still nightly? Cheers and clear skies
View ArticleAbout Kstar & Ekos at ARM 64 (RK 3399) - by: T-Studio
Everyone in the development team Thank you for always having a wonderful support. I got NanoPi M4 and installed Kstar & Ekos. (The system used rk3399 - sd - friendlydesktop - bionic - 4.4 - arm 64...
View ArticleDithering while guiding? - by: crw4096
Hello, The Guide Module help promises that you can click the dithering button and enter a number of pixels. But in my setup, it only says "manual dithering" in the button hover message. What should I...
View ArticleA couple of INDI control panel config annoyances - by: crw4096
Hi, There's a couple of little configuration annoyances I've had when starting up INDI. These are things I now check before clicking "connect" to avoid frustration. 1) I have two USB serial devices -...
View ArticleIncorrect focal length in FITS header? - by: crw4096
Hi, I was examining FITS headers for some other issue, and noticed that the focal length reported in the header (FOCALLEN tag) is for my guide scope, not my imaging scope. If you change the focal...
View ArticleI can't compile the INDI from its source code - by: oleg
Hello, I can't compile the INDI from its source code. Its configuration likes good: But I can't make it:
View Article