manual rotation disapeared in the ekos polar alignment - by: patdut
Hello, I get great troubles with the automatic ekos polar alignment. As the end of the mount movement seems not to be well detected the capture of a next image start before the mount stop. Which...
View ArticlePermanent offset while guiding - by: TallFurryMan
I made a long run with the guider and the simulators to check one particular point, the situation where a permanent offset appears while guiding. To me, a fine-tuned guiding system should not care...
View ArticleGuiding won't start because calibration fails - by: pug916
I am getting this error message: Scope cannot reach the start point after 35 iterations I've rebooted the Stellarmate, off/on the mount. connect/disconnect from stellarmate on the Mac. The mount is...
View ArticleReporting from Starfest- issues - by: gbeaton
Last night in the middle of an open field in the country I had a few issues... 1) GPS does not work 2) solver wil not converge. I have an update to this post :...
View ArticleFocusLynx Motor selection - by: FraGro
Hello, which Motor shall I select when I have an HSM20? Is this Motor already supported? Product Page Best Regards Frank
View ArticleInstalling pyindi-client on ubuntu raspberry pi - by: Lagreeni
This might be an easily answerable question, but it's really got me stumped. I'm redownloading pyindi-client following www.indilib.org/develop/indi-python-bindings.html . At --> pip3 install --user...
View ArticleMount control buttons in kstars - by: phomer60
From my experience I believe the synchronise button on the left is too similar to the stop sign used in many countries. I often need to use the stop icon when the mount is doing something unpredicated...
View ArticleFocusLynx Motor selection - by: FraGro
Hello, which Motor shall I select when I have an HSM20? Is this Motor already supported? Product Page Best Regards Frank
View Articleguide star lost after dither - by: alacant
Hi everyone I'm seeing frequent loss of guiding after a dither. The requested dither is only 3px but the dither itself is much larger than that; the mount seems to be hit far harder than is necessary...
View ArticleFailure to connect to QSI camera after build - by: phomer60
I completed a bulld on my Raspberry Pi 3 running Raspbian today and now File Attachment:File Name: log_19-11-42.txtFile Size: 27 KB the software fails to connect to my QSI 583 camera. It was working...
View ArticleindiWebmanager RESTful API | Start Server - by: Gonzothegreat
I see in the gitHub github.com/knro/indiwebmanager that the Start Server is in TODO state, any plans in implementing it?
View ArticlePort failure Error: Inappropriate ioctl for device. - by: Gonzothegreat
I have been using the following udev rule for a while now, working great until very recently. It does create /dev/Mount as expected. My EQmod is set to connect to that device, so far so good until...
View ArticleindiWebmanager: restart one driver only - by: pcxz
In some cases i have necessity to stop my canon camera ( for cleaning sensor from dusty ). I use indiwebmanager in remote to rpi3, is possible stop and start only indi_canon_ccd driver? Thanks.
View Articlescheduler does not start? - by: RogueSquadron
Now that I am back from vacation I wanted to try the scheduler with KStars 2.9.7 for the first time. I started the scheduled job after the planned start time, but the scheduler did not start the job,...
View ArticleAutomating capture of fast-moving objects - by: TallFurryMan
Make the Scheduler aware of the type of object it is attempting to capture, and in the case of a comet, asteroid, satellite, etc, have its procedure periodically realign the mount when the coordinates...
View ArticleAutomatic Exposure calculation for Flats is faulty - by: RogueSquadron
I was trying to take Flats with target ADU of 50 (8 bit per pixel) and tolerance 1. The calculation started correctly and reduces the exposure times, but then it starts jumping around, please see...
View Article4100 index (TYCHO - 2) importance in solver - by: T-Studio
4100 index (TYCHO - 2) importance in solver I used RaspberryPi 3, Ekos Solver, but I only used index file 4200 ~. As a result, many errors occurred and it took time to solve. Normally, Pi will be used...
View ArticleDirectly enter target coordinates for "capture and slew"? - by: fewayne
Hey all, In the Alignment module, the "capture and slew" option refers to "target coordinates". Can I enter those directly somewhere, without having to go through creating a sequence in Capture and a...
View Articlelibindidriver.so issue on RPi3 - by: kengs
I'm working on the Avalon driver and it works fine on x64 and x86 but I'm having a problem on ARM. The driver fails in a call to get_local_sidereal_time which is defined in indicom.c. It is in library...
View Articlescheduler: start capture after guiding has settled - by: alacant
Hi everyone I'm using PHD2 PPEC for guiding and would like to let the guiding run for a while so that it can establish it's database for corrections. Without the scheduler, I can manually begin the...
View Article