INDI drivers too much %CPU load - by: f6bvp
Hi, While tutorial_two example driver is running top Linux utility shows as much as 95% CPU occupation ! We have nearly achieved development phase of our INDI driver based on above example. It will...
View ArticleHNSKY, INDI client overhauled - by: han.k
FYI, the INDI client of the Hallo Northern Sky (HNSKY) planetarium has been overhauled in version 4.0.0q. Any feedback is welcome Han Download at: www.hnsky.org/software.htm or very soon from from...
View ArticleQuestions about equipment when running Ekos - by: kookoo_gr
i have installed all of my gear and i am doing some runs inside the house in order to get a feel for ekos and how to operate it and i have some questions that came up. i list them here instead of...
View ArticleFocusLynx last focus Position not pulling from controller - by: muckmuck
For some reason INDI doesn't pull the focus position from the FocusLynx/Focus Boss II when you connect to it. Even worse when you connect it resets the focus position to "0" which forces you to...
View ArticlePI3B, EOS1200D, "indi_canon_ccd" crashed again... - by: Damien
Hello everybody, since Januar I use a PI3B/Ubuntu 16.04LTS for my Setup it runs very good, Kstars is realy amazing, but now (after the last Upgrade ?) I can't use the Canon 1200D, Ekos crashed to...
View ArticleFocuser driver - by: Damien
Hello, I've done an arduino focuser with 3 speed, 1 Step, 1/8 Step, 1/32 Step Manually controled or in remote with terminal and a Script focus.sh To move inward 20 Steps: I send (Sérial via USB, ASCI...
View ArticleAstroImaging Channel Q&A - by: knro
I'll be joining the AstroImaging Channel live broadcast today Sunday August 5th, 2018. The hangout starts on 9:30 PM EST or 1:30 AM UTC. I'll be answering any questions regarding INDI, Ekos,...
View ArticleKStars update fails to update INDI Library - by: AR2STAR2
Hello folks, I have been following this forum for a while now as I switch from ASCOM to INDI, I am making good progress & I am very grateful for this excellent piece of software and am in awe of...
View ArticleHow to change port? - by: astromout
Hi, I now work with Kstar-Ekos. On my new computer I have a RS232 port on it. I'm on ubuntu. With "setserial -g /dev/tty[0123456789], it gives : "/dev/ttyS0, UARTY 16550A, Port : 0x03f8, IRQ : 4" So I...
View ArticleStrange crashes - new - by: PK
I have had no major issues for a while but this weekend I upgraded to KStars 2.9.7 on my new Macbook Air and noticed a new problem. Everything works great, and even a sequence of images starts without...
View Articlescheduler: how to enter RA and DEC values - by: alacant
Hi everyone Do we have an easy way of entering the centre frame coordinates for 'nothing' from kstars into the ekos scheduler? Let's say I want to enter the centre of this frame: here:
View ArticleGPS not working consistently - by: gbeaton
It seems to not work when the GPS device already has a fix before Kstars connects. Attached are logs showing that initially it doesn't connect. I disconnect and unplug the GPS them replug and if I...
View ArticleSolver will not converge - by: gbeaton
Its almost rare that I get the solver to converge on a target with "slew to target". I dont know if its a backlash problem but if so, maybe the target slewing needs to take out backlash. Anyway...
View ArticleSimple typo in latest Kstars 2.9.8 - by: procras
Sound notification for FITSReceived fails with error org.kde.knotifications: Audio notification requested, but sound file from notifyrc file was not found, aborting audio notification The offending...
View ArticleFull night recording while Astro Imaging Channel Q&A on SBC's - by: Jurgenk
Hi, I mentioned I recorded my imaging session in the chatroom during the Astro Imaging Channel in the Q&A on Single-Board-Computers in Astrophotography, featuring Jasem Mutlaq. It's a full session...
View Article10Micron driver crash 2.9.7 - by: Poison
I upgraded from 2.9.6 to 2.9.7 and can't get the 10Micron driver to work.It crashes shortly after connecting to the mount. I'm using Kstars/Ekos with ethernet connected directly to the mount. After a...
View ArticleATIK driver doesn't work if ArtemisHSCService is running! - by: polakovic
Hi! In last couple of weeks we received a lot of bug reports regarding CloudMakers drivers and Atik cameras on Mac computers with no apparent cause. One of our users (thank you Michael) finally found,...
View Article"Failed to start profile on remote INDI Web Manager." - by: Gonzothegreat
This is a weird one. I have the indiweb (latest one 0.1.5) setup and up and running, profile is set with all the drivers I need (it works fine before). I can hit the start button on the web page and...
View ArticleMissing icon/feature in Ekos 2.9.7 - by: Gonzothegreat
I swear I thought I was able to go to the Indi control Panel from there before:
View Article