indi-eqmod DEC reverse disabled upon restart - by: alacant
Hi everyone. I think this may be related to guiding flips I'm having with PHD2 guiding. If I enable Reverse DEC in eqmod and save the configuration, the next time I restart INDI, it is disabled again....
View ArticleScheduler - Exposure past start-up time on ASAP setting - by: El Corazon
Hi Eric and Jasem, I came across a new idiosyncracy in the scheduler: When I program a specific target and I set it to start ASAP it will work fine ONLY if I start the scheduler BEFORE astronomical...
View ArticleCaptures stalled permanently after dithering - by: gbeaton
Last night guiding and dithering was working pretty well. But a few times the captures stopped with a status indicating it was waiting for dithering to complete. The problem was that dithering had...
View ArticleConnecting to same DSLR camera model not possible - by: AstroWill
Hi, Currently I've been dual imaging using two KStars instances. I have attempted triple imaging with three instances and it works but my QHY5 is very unstable and unpredictable (besides not being...
View ArticleASI 183 with USB 2 creates extreme readout noise at one side - by: RogueSquadron
Hi, I did some tests with the ASI 183 MC Pro and found out that when connected at USB 2 it creates extreme readout noise at one side of the sensor. As I would like to use the cam with StellarMate, I...
View Articleindi-webcam - by: doume
Hello, Not able to install indi-webcam... as described here: www.indilib.org/devices/ccds/indi-webcam.html response: "E: Impossible de trouver le paquet indi-webcam" Not able to find paquet with...
View ArticleZWO USBST4 adapter - by: doume
Hello, Hi all, I'm trying to use ZWO USB to ST4 adapter. www.pierro-astro.com/materiel-astronomiq...toguidage-zwo_detail Seems not to be functional with Ekos. Is there a specific device to configure in...
View ArticleNew Download of Kstars Crashes in Mac OS X High Sierra 10.13.6 - by: jrf
Was having trouble with Kstars. Noted that there was a newer version available so deleted old version and downloaded and installed latest Kstars. Everything seemed to be OK, but when I started the...
View ArticleAtik driver can't install - by: kookoo_gr
Hi new to this forum and Linux in general I have a raspberry 2 and i want to use it for my astrophotography setup. I have installed the AstroPi3 and i have almost all of my gear at the system. The...
View ArticleClik here to view.
Moon-tracking - by: the.cakemaker
I‘d like to shoot a timelapse of the lunar eclipse here on friday. Now there are a few thoughts that i am not sure of. 1. How can i get the moon in the middle of my view WITHOUT actually see the moon....
View ArticleAdjust Gain of CCD with PyIndi client - by: oskr_96
Hey guys!, i'm trying interfacing a ZWO ASI120MC-S CCD with Indi and pyIndi client, there is done, but i can't change the gain value yet, and this is a parameter that i need for the application, If...
View ArticleClik here to view.
Installing INDI/KSTARS-EKOS on a NanoPC-T4 - by: PK
I just received my NanoPC-T4 today. While I tweak some bugs out of my Stellarmate, and use that system for my current astrophotography projects, I wanted to play with a new toy. I will attempt to get...
View ArticleConsistance of equipment parameter setting - by: RogueSquadron
I am not sure, if I missed some places to set setting but so far I would like to ask for the following: I feel currently it is not totally consistent where to set different settings for the equipment....
View Article10micron Wake On Lan - by: fenriques
10micron mounts now support Wake On Lan for remote switch on/off. Some clients (like Michel's MountWizzard) already support it and I think it's really useful. It would be nice to have WOL also on Ekos....
View ArticleKStars: Integration of Wishlist - Session Plan - Ekos Scheduler - by:...
Hello, here are my wishes for the better integration of KStars Wishlist -> Session Plan -> Ekos Scheduler. 1.) Please allow adding to Ekos Scheduler also from the session plan, not only from the...
View ArticleSmallBug: Temp set. in capture module is not displayed - by: RogueSquadron
Hi, I just wanted to take Calibration frames at different temperatures and made according jobs for that. I realized when you edit the job the displayed target temperature is not updated in the screen....
View ArticleSadr Mosaic - by: knro
Thought I'd share with you a new article on INDI Website about my friend's journey with Ekos & INDI. He just recently created Sadr Mosaic completely with Ekos and it's looking good. It's still...
View ArticleWrong Time Problem - by: the.cakemaker
Hi there! When working with Kstars these days i realized that every time i start Kstars, the time is wrong by one hour. I checked the settings in the mount tab, and it says utc offset 3. which is not...
View ArticleMount Model lets solver crash repeatedly - by: RogueSquadron
Hello, today I tried the mount model module with offline solving for the first time. I tried it several times and always the first try on solving offline let the solver process crash immediately. Also...
View Articleekos dither not received by PHD2 - by: alacant
Hi everyone Whilst most ekos dither requests are received by PHD2, some are not. ekos sends a dither, but PHD2 does not receive it: [2018-07-25T01:45:52.547 CEST INFO ][ org.kde.kstars.ekos.capture] -...
View Article