Raspberry Pi RAM swap file - by: rlancaste
I was having my friend take a look at my Raspberry Pi setup script and he commented that the swap file James Taylor had recommended for increasing the RAM could be a problem for the SD card due to its...
View ArticleExposure time failing while guiding in Ekos guide module. - by: timsdeepsky
Greetings....When i am guiding within the Ekos guide module,,no matter how many seconds i start the exposure count down at,,the exposure time countdown starts,,and then drops to 10 seconds and finishes...
View ArticleINDI Web Manager - Autostart? - by: HelgeMK
Hi, I somehow got stuck with starting up the INDI webmanager upon boot process (I am using the rock64). When running the command "sudo systemctl status indiwebmanager.service" this is the message I...
View ArticleInstallation dependencies on Raspbian - by: elmichelangelo
Hi, I want to install the dependencies on my Raspberry Pi with Raspbian stretch lite. I get following error: so i think because of the problem with the dependencies the manuel installation of INDI also...
View ArticleASI1600MM Pro support - by: rankinstudio
I'm getting ready to pull the trigger on this cam, but with the internal buffer ect, is it supported in INDI? Cheers! David
View ArticleDemo / workshop resources - by: dokeeffe
My local club may be interested in a workshop/demo of indi with kstars. Has anyone any resources like presentation slides, marketing material, high level diagrams etc etc. Thanks, Derek
View ArticleFCUSB worth getting to motorize focuser? - by: gbeaton
I'm thinking of motorizing my focuser - Explore Scientific Crayford 2" focuser. It looks like I should get a JMI MFESC3 and replace the controller with Shoestring FCUSB. And the shoestring controller...
View Articleindi-nexstarevo issues and questions - by: tmdag
Hi! My first post on the forum! @Paweł T. Jochym, I'm justr trying out your driver indi-nexstarevo. Thank you for adding that support!! I have Celestron Nexstar Evolution 6" and Dell laptop with Fedora...
View ArticleASI-290MC ZWO CCD crashing on Fedora27 - by: tmdag
Hi, I was just about to make post for my ZWO CCD making wierd colors but I cannot even run my driver anymore. I have rescently updated to Fedora 27 and looks like drivers do not like that. This is my...
View ArticleGetting new drivers published - by: jaimea
Hello, I've just written a couple of focuser drivers for the Lunatico products (Armadillo / Platypus). What's the next step to have them included in the distribution? They do not need any external...
View ArticleTCP / UDP connections - by: jaimea
Hello, I've noticed some kind of UDP support has been added recently; I don't manage to get the standard "tty_read" and "tty_write" to work with it. Looking at connectiontcp.cpp code, it is a bit...
View ArticleAstrometry API key.. - by: maxer
Hi all.. Where did the Astrometry API key field go, I can't find it anymore ? Br /Markku
View ArticleCan't select Shoestring FCSUB in Ekos - by: gbeaton
I'm running Stellarium remotely from a Mac. Stellarium has the FCSUB driver but I can't select it from the Mac in order to configure Stellarmate. I can run the server on the Mac but it doesn't do any...
View Articleindi_celestron_gps with Evolution - no response - by: tmdag
Hi, I'm trying to run 'indi_celestron_gps' with my Evolution 6". I am connecting Celestron RS232 cable to hand controller and then using serial to usb, i'm connecting it to my laptop. Driver states...
View Articleseveral issues in setting up robotic Ekos session - by: Jurgenk
Hello, I'm in the process of setting up a fully automated robotic astrophotograph. I still have some issues mentioned here below in the captured videos. Can anyone take a look at them? EKOS KStars...
View ArticleGetting started in driver development - by: Gina
I want to create my own drivers to control electronic devices that aren't covered by any of the standard drivers. I started from the Tutorial section and entered all the command lines to build the...
View ArticleOnStep Driver not accepting date - by: Astrodan
Anyone else seeing this problem with OnStep? [2017-11-24T19:21:31.239 EST DEBG ][ org.kde.kstars.indi] - LX200 OnStep : "[SCOPE] <setUTCOffset> " [2017-11-24T19:21:31.239 EST DEBG ][...
View ArticleASI1600 - Changing Binning results in false image geometry - by: starhopper
Hello Forum, there is strange behavior with changing binning. Maybe it is a issue with the driver? Changing Binning from 1x1 to 4x4 and back to 1x1 results in a false image geometry. This is...
View ArticleStrange Colors with ZWO ASI290MC - by: tmdag
Hi, While waiting for dark skies, I'm testing my new ZWO camera with Kstars. I am not yet sure if this is bug or a feature ? I have pointed camera through my telescope, during the day to some...
View ArticleLog Files - What is the meaning of "port FD 3" - by: HelgeMK
Hi, I am trying to get my head around this: Among the devices I am connecting is an EQ6 and a diy moonlite focuser. I have done "persistant serial port mapping". When starting up INDI, it never happens...
View Article