So DSLR and mount are running nicely on INDI on an RPi2, last thing to get to work is guiding.
I use a webcam (PCVC840 acting as SPC900) and the indi_v4l2_ccd driver. PHD2 runs locally on the RPi2, using INDI to access the webcam.
All seems fine, driver connects, I can change settings etc and I can start the image capture loop, but at some point the chain stops. The final message from the indi server is:
At the same time some system messages are logged, dmesg gives:
Does anybody have a clue on what's happening? It seems that the webcam device driver gets stuck, and the interface to the indi_v4l2_ccd service is shut down...
I use a webcam (PCVC840 acting as SPC900) and the indi_v4l2_ccd driver. PHD2 runs locally on the RPi2, using INDI to access the webcam.
All seems fine, driver connects, I can change settings etc and I can start the image capture loop, but at some point the chain stops. The final message from the indi server is:
At the same time some system messages are logged, dmesg gives:
Does anybody have a clue on what's happening? It seems that the webcam device driver gets stuck, and the interface to the indi_v4l2_ccd service is shut down...