[cross posted this to phd2 forums as well ]
Mount ; Skywatcher AZ GTI
GuideCamera : ZWO 120mm-s
I am trying to connect the new skywatcher AZ GTI in EQ mode to Phd2 . When I run the wizard and chose indi mount, I do not get any option to chose the indi mount drive; the drop down is empty/disabled.
Even trying to start Phd2 from ekos, PHD2-mount connection fails. Mount connection window in Phd2 shows that indi is connected . When the indi button is clicked it loads all the indi properties including the mount. Enabled verbose logging also shows me the mount commands, yet phd2 doesn't connect to mount.
I am using indi_synscan_telescope as mount driver and do not have troubles controlling the mount via ekos.
This is from phd2 debug logs.I am not sure if this error with indi or ekos. Any suggestions?
00:00:51.977 00.001 1691349600 device ZWO CCD ASI1600MM Pro interface(s) CCD|GUIDER
00:00:51.977 00.000 1691349600 exclude device ZWO CCD ASI1600MM Pro not a mount
00:00:52.285 00.308 1691349600 INDIConfig: newDevice SynScan
00:00:52.461 00.176 1691349600 device SynScan interface(s) TELESCOPE
00:00:52.461 00.000 1691349600 exclude device SynScan not a mount
00:02:59.779 127.318 1958732352 INDI Mount connecting to device [INDI Mount]
00:03:14.840 15.061 1958732352 INDI Mount bg connection failed canceled=0
00:03:14.841 00.001 1958732352 Alert: Cannot connect to mount INDI Mount: Connection timed-out
00:03:14.927 00.086 1691349600 INDI Mount: serverDisconnected
00:03:14.928 00.001 1958732352 INDI Mount: serverDisconnected
00:03:14.929 00.001 1958732352 Error thrown from /build/phd2-tqHHV0/phd2-2.6.5.rev20180723/scope_indi.cpp:835->INDI Scope: cannot get side of pier when not connected
00:03:14.929 00.000 1958732352 INDI Mount: SideOfPier returns -1
00:03:14.930 00.001 1958732352 INDI Mount: connectServer done ready = 0
00:03:14.930 00.000 1958732352 Throw from /build/phd2-tqHHV0/phd2-2.6.5.rev20180723/gear_dialog.cpp:1307->OnButtonConnectScope: connect failed
00:03:14.930 00.000 1958732352 Status Line: Mount Connect Failed
Mount ; Skywatcher AZ GTI
GuideCamera : ZWO 120mm-s
I am trying to connect the new skywatcher AZ GTI in EQ mode to Phd2 . When I run the wizard and chose indi mount, I do not get any option to chose the indi mount drive; the drop down is empty/disabled.
Even trying to start Phd2 from ekos, PHD2-mount connection fails. Mount connection window in Phd2 shows that indi is connected . When the indi button is clicked it loads all the indi properties including the mount. Enabled verbose logging also shows me the mount commands, yet phd2 doesn't connect to mount.
I am using indi_synscan_telescope as mount driver and do not have troubles controlling the mount via ekos.
This is from phd2 debug logs.I am not sure if this error with indi or ekos. Any suggestions?
00:00:51.977 00.001 1691349600 device ZWO CCD ASI1600MM Pro interface(s) CCD|GUIDER
00:00:51.977 00.000 1691349600 exclude device ZWO CCD ASI1600MM Pro not a mount
00:00:52.285 00.308 1691349600 INDIConfig: newDevice SynScan
00:00:52.461 00.176 1691349600 device SynScan interface(s) TELESCOPE
00:00:52.461 00.000 1691349600 exclude device SynScan not a mount
00:02:59.779 127.318 1958732352 INDI Mount connecting to device [INDI Mount]
00:03:14.840 15.061 1958732352 INDI Mount bg connection failed canceled=0
00:03:14.841 00.001 1958732352 Alert: Cannot connect to mount INDI Mount: Connection timed-out
00:03:14.927 00.086 1691349600 INDI Mount: serverDisconnected
00:03:14.928 00.001 1958732352 INDI Mount: serverDisconnected
00:03:14.929 00.001 1958732352 Error thrown from /build/phd2-tqHHV0/phd2-2.6.5.rev20180723/scope_indi.cpp:835->INDI Scope: cannot get side of pier when not connected
00:03:14.929 00.000 1958732352 INDI Mount: SideOfPier returns -1
00:03:14.930 00.001 1958732352 INDI Mount: connectServer done ready = 0
00:03:14.930 00.000 1958732352 Throw from /build/phd2-tqHHV0/phd2-2.6.5.rev20180723/gear_dialog.cpp:1307->OnButtonConnectScope: connect failed
00:03:14.930 00.000 1958732352 Status Line: Mount Connect Failed